Wheel brushes crimped Composite FLEX, with hole

COMPOSITE FLEX wheel brush RBUP dia. 300x25x50.8 mm hole SiC filament dia. 1.10 mm grit 120 stationary

Item number: 79183660
EAN: 4007220038765
Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Grit size
Technical information

COMPOSITE FLEX wheel brush RBUP dia. 300x25x50.8 mm hole SiC filament dia. 1.10 mm grit 120 stationary

Dia. external
300 mm
Dia. external [inch]
12 Inch
Dia. filament material
1.1 mm
Dia. hole
50.8 mm
Filament material
Silicon carbide (SiC)
Grit size
Length, filament
60 mm
Mounting system
Centre hole
RPM, max.
1800 RPM
RPM, optimum, from
500 RPM
RPM, optimum, to
800 RPM
25 mm
Packaging unit
1 piece

Particularly flexible brush. Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing. Developed specially for industrial use.

Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times. For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected.

Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

  • Long tool life and aggressive brushing effect due to a very high filament density.
  • Extremely smooth operation due to even distribution of the filament material.
  • Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up.
  • Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • Use coolant for applications where large amounts of heat are produced.
Materials that can be worked
Cast iron
Other non-ferrous metals
Stainless steel (INOX)
Steel, cast steel
Thermosetting plastics
Structuring (matt finishing, brush matting and satin finishing)
Drive types
Stationary machines
Tool machine


recommends composite brushes to achieve maximum stock removal as quickly as possible.


recommends composite brushes to sustainably reduce the vibrations produced during use.

chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC