Tungsten carbide burr set for high performance, cut STEEL

Tungsten carbide high-performance burr set STEEL 5-piece dia. 12mm shank dia. 6mm for steel

Item number:: 21901812
EAN:: 4007220004357

Tungsten carbide high-performance burr set STEEL 5-piece dia. 12mm shank dia. 6mm for steel 2

Tungsten carbide high-performance burr set STEEL 5-piece dia. 12mm shank dia. 6mm for steel 3

Tungsten carbide high-performance burr set STEEL 5-piece dia. 12mm shank dia. 6mm for steel Youtube

Technical data Change variant

Retailers-Search

This set contains

Tungsten carbide high-performance burr STEEL cylindrical ZYA dia. 12x25 mm shank dia. 6 mm for steel

Item number: 21101987

EAN: 4007220937242
Tungsten carbide high-performance burr STEEL ball KUD dia. 12x10 mm shank dia. 6 mm for steel

Item number: 21112887

EAN: 4007220936870
Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm for steel

Item number: 21105387

EAN: 4007220936696
Tungsten carbide high-performance burr STEEL pointed tree SPG dia. 12x25 mm shank dia. 6 mm for steel

Item number: 21122787

EAN: 4007220937082
Tungsten carbide high-performance burr STEEL tree shape with radius end RBF dia. 12x25 mm shank dia. 6 mm for steel

Item number: 21117887

EAN: 4007220936931

Technical information

Tungsten carbide high-performance burr set STEEL 5-piece dia. 12mm shank dia. 6mm for steel

Cut: STEEL
Dia. shank: 6 mm
PFERD type: 1812 STEEL
Packaging unit: 1 piece

Description

Set 1812 STEEL contains five tungsten carbide burrs for processing steel and cast steel in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage. The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools. Five further slots are available for other burrs.

Advantages

Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
Workpieces are protected through significantly lower thermal load.
The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Case-hardened steels; Cast steel; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the STEEL cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.