Threaded cup brushes, knotted

Cup brush knotted TBG dia. 65 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1)

Item number: 43305003
EAN: 4007220220740
Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Mounting system
Packaging unit
Technical information

Cup brush knotted TBG dia. 65 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1)

Dia. external
65 mm
Dia. external [inch]
2.3 /4 Inch
Dia. filament material
0.35 mm
Dia. thread
Filament material
Stainless steel wire (INOX)
Grit size
No information
Length, filament
22 mm
Mounting system
Number, knots
18 pcs.
POS packaging
RPM, max.
12500 RPM
RPM, optimum, from
5000 RPM
RPM, optimum, to
12500 RPM
Packaging unit
1 piece

Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets.|The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

  • Aggressive brushing effect due to the very stiff wire knots.
  • Very good corrosion resistance.
  • The brush is degreased and does not leave any oil residue on the workpiece.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • For optimum results, use on powerful angle grinders.
Materials that can be worked
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium alloys
Paint stripping
Removing heat discolouration
Removing oxide layers
Root seam processing
Work on fillet welds
Work on weld seams
Drive types
Angle grinder
Drive spindle
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC