POLIVLIES hook and loop discs

POLIVLIES hook and loop disc PVKR aluminium oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder

Item number:: 42871418
EAN:: 4007220354278

POLIVLIES hook and loop disc PVKR aluminium oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder 2

Technical data Change variant

Retailers-Search

Choose options

Dia. external

115 mm 125 mm 180 mm

Grit size

100 G 180 M 240 F

Packaging unit

Reset Filter

Matching accessories & spare parts

Backing pad PVKRH 125 M14

Backing pad PVKRH 125-22 M14

Technical information

POLIVLIES hook and loop disc PVKR aluminium oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder

Abrasive: Aluminium oxide A
Dia. external: 125 mm
Grit size: 240 F
Max. RPM: 4850 RPM
RPM, optimum: 3000 RPM
Version: fine, blue
Packaging unit: 10 pieces

Description

POLIVLIES hook and loop discs are suited to grinding larger surfaces. The flexible system comprising a POLIVLIES hook and loop disc and the associated POLIVLIES hook and loop disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 240 F = fine (blue)

Advantages

High economic efficiency due to high abrasive performance and long tool life.
Creates a consistently high surface quality over the entire tool life, as new sharp abrasive is steadily released.
Highly flexible, enabling optimal adjustment to the contour.

Recommendations for use

For the best results, use at a recommended cutting speed of 15-20 m/s.
Use with POLIVLIES self-adhesive disc holder.
Break out the pre-punched centring hole if required.

Ordering notes

Please order POLIVLIES self-adhesive disc holders separately.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder

Downloads

POLIVLIES hook and loop discs

POLIVLIES hook and loop disc PVKR aluminium oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder

Matching accessories & spare parts

PFERD Newsletter subscription