diamond polishing paste DPP grit size 10µ medium-fine syringe containing 5g for hard material

Technical information

Colour code: light blue
Contents: 5 g
Grit size: 10
Suitable for use on: Very hard materials
Version: 10 (medium-fine) = P 2000
Packaging unit: 1 piece

Description

Diamond polishing pastes guarantee quick and efficient work, particularly in tool-making and mould-making.

Diamond polishing pastes are used for working on very hard materials, e.g. tungsten carbide and hardened steels. They are used in combination with felt polishing cones or wheels. The diamond polishing pastes can be thinned and dissolved with water and alcohol.

Grit size according to ISO 6344 = P 2000

Advantages

High productivity.
Quick results.
Coordinated selections of grits.

Recommendations for use

When using diamond polishing pastes, use the most coarse paste first.
If extensive surface improvements are required, use several grit sizes one after another, each finer than the previous, cleaning well between pastes.
When changing grit size, make sure that a new, clean abrasive support (e.g. felt point or felt wheel) is used.

Ordering notes

The grit sizes are specified in ?m.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Polishing

Drive types: Manual application

Downloads

Polishing paste

diamond polishing paste DPP grit size 10µ medium-fine syringe containing 5g for hard material

Matching accessories & spare parts

PFERD Newsletter subscription