handpiece MIM HAS 3/600 S3 60,000-1,000 RPM/260 watts

Technical information

Collet group: 19
Height: 30 mm
Incl. dia collet [mm]: 3 mm
Input voltage: 36 volts
Input voltage 2: 50 volts
Length: 170 mm
Net weight: 0.393 kg
PFERD type: MIM HAS 3/600 S3
Power consumption: 260 watts
Power output: 150 watts
Rotational speed range, from: 1000 RPM
Rotational speed range, to: 60000 RPM
Version: Tool change with 2 keys
WEEE reg. no.: 55553582
Width: 30 mm
Packaging unit: 1 piece

Description

Straight micro motor handpiece suitable for micro motor control devices MIM STG 3/600 and MIM STG 3/800.

The tool can be changed with 2 keys.

Advantages

Very high concentricity speed.
Very quiet.
Automatic speed limitation.
Start interlock without clamped tool.
The compact design enables good accessibility.

Safety notes

Safety extra-low voltage.
Start/stop switch on handpiece.

Contents

1.8 m handpiece cable length, 2 keys, 3 or 6 mm collet

PFERDVALUE

PFERDEFFICIENCY

recommends the drive for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

PFERDERGONOMICS

recommends the drive to sustainably reduce the noise produced during use and to improve comfort when working.

Downloads

Micro motor handpieces MIM HAS