HSS rotary cutters, cut 2, cylindrical shape with radius end C

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 2 universal medium chip divider

HSS C 0616/6 Z2

Item number:: 22410726
EAN:: 4007220058831

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 2 universal medium chip divider 1

Technical data Change variant

Retailers-Search

Choose options

Dia. external

6 mm 12 mm

Length, cut

16 mm 25 mm

Reset Filter

Matching accessories & spare parts

Handpieces for RCK system RCK GS 4/100

Technical information

HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 2 universal medium chip divider

Cut: 2
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 16 mm
Length, total: 60 mm
RPM, rust and acid-resistant steels: 3.200 - 4.300 RPM
RPM, soft non-ferrous metals: 10.700 - 13.300 RPM
RPM, thermoplastics, reinforced (GRP/CRP) with a fibre content of less than 40%: 10.700 - 13.300 RPM
Packaging unit: 1 piece

Description

Cut 2 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter.

Cylindrical burr with radius end.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Case-hardened steels; Cast iron; Cast steel; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardwood; Plastics; Soft aluminium alloys; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Tool steels; White annealed cast iron (GTW, GJMW); Wood; Zinc