Cup brushes knotted, with bridle, with thread

cup brush with bridle knotted TBGR dia. 125x5/8"-11 steel wire dia. 0.50mm angle grinders

Item number:: 43308010
EAN:: 4007220584811

cup brush with bridle knotted TBGR dia. 125x5/8"-11 steel wire dia. 0.50mm angle grinders Youtube

Technical data Change variant

Retailers-Search

Choose options

Dia. external

80 mm 100 mm 125 mm

Dia. filament material

0.5 mm

Dia. thread

5/8-11 M14x2

Filament material

Steel wire (ST)

Packaging unit

Reset Filter

Technical information

cup brush with bridle knotted TBGR dia. 125x5/8"-11 steel wire dia. 0.50mm angle grinders

Dia. external: 125 mm
Dia. filament material: 0.5 mm
Dia. thread: 5/8-11
Filament material: Steel wire (ST)
Length, filament: 30 mm
Length, filament to ring: 25 mm
Max. RPM: 6500 RPM
Mounting system: Thread
Number, knots: 32 pcs.
RPM, optimum, from: 3300 RPM
RPM, optimum, to: 6500 RPM
Packaging unit: 1 piece

Description

Aggressive brush with bridle. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter on large areas.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Aggressive brushing effect due to the very stiff wire knots.
The bridle prevents the wires spreading out sideways.
Particularly long tool life.
The bridle enables the spreading out and flexibility of the brush filament to be controlled.
If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For optimum results, use on powerful angle grinders.
Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Angle grinder

Downloads

Cup brushes knotted, with bridle, with thread

cup brush with bridle knotted TBGR dia. 125x5/8"-11 steel wire dia. 0.50mm angle grinders

PFERD Newsletter subscription