Cup brush crimped TBU dia. 50 mm shank dia. 6 mm BLUE filament dia. 1.10 mm grit 180 power drills

Technical information

Dia. external: 50 mm
Dia. filament material: 1.1 mm
Dia. shank: 6 mm
Filament material: Plastic filament, fine (BLUE)
Grit size: 180
Max. RPM: 4500 RPM
Mounting system: Shank
Packaging: POS packaging
Packaging unit: 1 piece

Description

Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece. Specially developed for use within a low rotational speed range on cordless drills and power drills.

Brushes with plastic filament are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminium; Brass; Bronze; Cast iron; Cast steel; Copper; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Paint stripping; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Flexible shaft drive; Power drill

Downloads

Cup brush, crimped, universal, for power drill, shank-mounted

Cup brush crimped TBU dia. 50 mm shank dia. 6 mm BLUE filament dia. 1.10 mm grit 180 power drills

PFERD Newsletter subscription