COMBIDISC ceramic oxide grain mini fibre disc CDFR dia. 38 mm CO-COOL80 for backward grinding

Technical information

COMBIDISC ceramic oxide grain mini fibre disc CDFR dia. 38 mm CO-COOL80 for backward grinding

Abrasive: RS ceramic oxide grain CO-COOL version
Clamping system: CDR system
Dia. external: 38 mm
Grit size: 80
RPM, optimum, from: 10000 RPM
RPM, optimum, to: 16000 RPM
Packaging unit: 100 pieces

Description

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.

RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

Advantages

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.
Ideal for use in extremely difficult-to-reach areas.
Convenient and safe backward working.

Recommendations for use

Use COMBIDISC midget fibre discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Move the tool to the location to be worked. To grind, do not push it onto the surface, pull it towards yourself.
To ensure optimum utilization of the grinding surface, use the SBHR 20 or SBHR 25 abrasive disc holder.
Always use the RS abrasive discs at the specified optimum rotational speed and do not take the maximum permitted rotational speeds of the SBHR 20 or SBHR 25 holder as the basis.

Ordering notes

Please order abrasive disc holder separately.

Safety notes

The maximum permitted peripheral speed is 50 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium

Applications: Deburring; Leveling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC tools to reduce tool changing and setting-up time.

PFERDERGONOMICS

recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust produced during use and to improve comfort when working.

Downloads

COMBIDISC abrasive discs CD/CDR RS