Unmounted flap wheels

flap grinding wheel FR dia. 250x50mm centre hole dia. 44.0mm A150 for general use

Item number:
44742151
EAN:
4007220469132

Login / Register
Choose options
Abrasive
Dia. external
Grit size
Width
Technical information
flap grinding wheel FR dia. 250x50mm centre hole dia. 44.0mm A150 for general use

Abrasive
Aluminium oxide A
Dia. external
250 mm
Dia. hole
44 mm
Grit size
150
Max. RPM
3800 RPM
RPM, optimum
2100 RPM
Width
50 mm
Packaging unit
1 piece
Description

On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure. Their flexibility enables them to adapt perfectly to the contours of the workpiece. The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond.

In ISO 5429, unmounted flap wheels are designated as "flap wheels".

For general applications from coarse to fine grinding.

Advantages
  • Highly flexible, enabling optimal adjustment to the contour.
  • Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed.
  • Can be used face-down very close to edges and in corners thanks to special clamping system.
Recommendations for use
  • Reducing the contact pressure and the peripheral speed and adding grinding oil diminishes tool wear and thermal load on the workpiece.
  • To increase the stock removal rate, it is advisable to use a coarser type of grit instead of increasing the contact pressure. This will prevent unnecessary tool wear and thermal load on the workpiece.
  • The increase in cutting speed leads to a slightly finer surface quality. Increasing the contact pressure makes the surface slightly coarser. The softer the material that is being worked on, the coarser the surface (when using the same grit size).
  • For the best results, use at a recommended cutting speed of 15-30 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
  • Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
  • For the best results, use a tool drive with an output of 1,000–1,500 watts.
Ordering notes
  • Please order compatible arbor separately.
  • Compatible arbor: FR/VR 12/44,0 (EAN 4007220479650)
Safety notes
  • As a rule, unmounted flap wheels should be used with the appropriate clamping flanges.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
  • The contact pressure must be significantly reduced if the specified optimum rotational speed is exceeded.
  • The maximum permitted peripheral speed is 50 m/s.
Materials that can be worked
Aluminium
Annealed cast iron
Brass
Cast steel
Copper
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Applications
Deburring
Leveling
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Surface work
Work on weld seams
Drive types
Flexible shaft drive
Straight grinder
PFERDVALUE

PFERDERGONOMICS

recommends flap wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.