POLICAP abrasive cap PC conical shape with radius end aluminium oxide dia. 21x40mm A280 for general use

Technical information

Abrasive: Aluminium oxide A
Dia. external: 21 mm
Grit size: 280
Height: 40 mm
RPM, optimum: 9500 RPM
Packaging unit: 50 pieces

Description

POLICAP abrasive caps in conical shape with radius end KEL (previously shape L).

POLICAP tools have a seamless design and the entire tool surface can be used.

For general use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and mould-making and for corresponding repair works. Also suitable for working on plastics, wood and fillers in model crafting.

Colour code for grit size 280 = red brown

Advantages

The abrasive caps and abrasive spiral bands are firmly held in place on the holder as the holder expands during use.
Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
Easy tool change.

Recommendations for use

To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach.
For the best results, use at a recommended cutting speed of 10-20 m/s.

Safety notes

The maximum permitted peripheral speed is 25 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Cast steel; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Leveling; Step-by-step fine grinding; Surface work

Drive types: Flexible shaft drive; Straight grinder

Downloads

POLICAP cones conical shape with radius end (KEL)

POLICAP abrasive cap PC conical shape with radius end aluminium oxide dia. 21x40mm A280 for general use

PFERD Newsletter subscription