compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts 1

compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts 1

Pneumatic angle grinder PWS 26/150

compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts

Item number: 80201035

EAN: 4007220224038

Login / Register

Retailers-Search

Technical information

compressed-air turbo angle grinder PWT 26/150 HV NITOCUT for dia. 150mm 12,000 RPM/2,600 watts

Air consumption, at idle: 0.9 m³/min
Air consumption, under load: 2.25 m³/min
Air supply hose internal dia.: 16 mm
Dia. thread: M14
Dia. tool mounting: 25.4 mm
Exhaust direction: bottom
Height: 97 mm
Length: 295 mm
Power output without oil: 2600 watts
Rotational speed without oil: 12000 RPM
Throttle type: Lever
Packaging unit: 1 piece

Description

The exhaust air flow of the air grinder is at the bottom.

NITOCUT angle grinder with tool diameter 150 mm. The drive has an integrated centrifugal governor. It must only be used without oil.

Advantages

The drive is powerful.
Thanks to its threaded mounting, the drive is ideal for the recommended tools with female thread or flange mounting.
Its integrated centrifugal governor enables a constant rotational speed to be maintained during use.

Recommendations for use

Suitable for NITOCUT cut-off wheel 150 mm.

Safety notes

Only suitable for 150 mm NITOCUT cut-off wheels.
Conventional cut-off wheels achieve a max. peripheral speed of 80 m/sec. They must not be used on the NITOCUT angle grinder.
In order to prevent misuse, the specially produced angle grinder only allows NITOCUT cut-off wheels to be mounted.
Using oil with the compressed air can damage the motor.

PFERDVALUE

product.aggregation.prv-eff

product.aggregation.prv-ergo

product.aggregation.prv-ergo

Downloads